Aero Hunter Tree Strap

The Aero Hunter Tree Strap is used to create a life-safety anchor on the trunk of a tree. 

The Aero Tree Strap is a length of climbing rope with a small loop tied on one end and a large loop tied on the other using a figure 8 on a bight. A prusik friction knot is tied on the rope using 10mm accessory cord.  A double locking carabiner is clipped into the eyes of the prusik for safe connection to your saddle belt. You can adjust the length of the Tree Strap by pulling the rope through the prusik to shorten it, or by pulling down on the prusik to lengthen it. This is a self-advancing system that works easily using one hand.

We offer the tree strap in two lengths. The standard length is 6 ft with all knots tied. We also offer it in a 12 ft length for an upgrade charge of $5.75. Please use the menu above to select the length you prefer.

Here's how to choose the best length for you:

It's important to set the tree strap on the trunk so that it does not slip.

You can keep it from slipping by:

• wrapping the rope twice around the trunk, or
• passing the carabiner end of the rope twice through the loop.

--Choose the standard 6 ft strap if you only want a minimum useful length, and your hunting trees are 16" diameter or less.

--If your hunting trees have a diameter greater than 16", or if you want to lock the strap by wrapping it twice on the trunk, go for the longer strap.

SPECIFICATIONS

Rope: Samson Predator 7/16 diameter double braid climbing rope, rated 6,000 lbs
Carabiner: Fusion double locking, rated 6000 lbs
Prusik cord: Everson Cordage 10 mm camo cord with eyes at both ends, rated 2760 lbs

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: